• ?

    新闻资讯

    MENU

    金属接头 软管接头
    当前位置 : 主页 > 新闻资讯 > 公司新闻 >

    【中英表】英国接头标准(BS joint standards)

    发布日期:2017-06-29   阅读量: 304 次

    编号 中文名称 英文名称
    BS 1560-3.2-1989 管子、阀门和接头(规定等级)用圆法兰.第3部分:钢、铸铁和铜合金法兰.第2节:铸铁法兰规范 Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for cast iron flanges
    BS 1782-1951 消防软管接头除外的吸入软管和送水软管接头(1.5英寸至8英寸标称尺寸)规范 Specification for couplings for suction and delivery hose (11/2 in. to 8 in. nominal sizes) other than fire hose couplings
    BS 1906-1952 (标称尺寸1/8英寸-1/4英寸)软管接头(露天和水中使用)规范 Specification for hose couplings (air and water) (1/8 in. to 11/4 in. nominal sizes)
    BS 2051-1-1973 工程用管与管接头规范.第1部分:工程用铜与铜合金毛细管与耐压管接头 Tube and pipe fittings for engineering purposes - Copper and copper alloys capillary and compression tube fittings for engineering purposes
    BS 2051-2-1984 工程用管与管接头规范.第2部分:橄榄型铜合金耐压管接头 Tube and pipe fittings for engineering purposes - Specification for olive type copper alloy compression tube fittings
    BS 2464-1954 汽油、石油和润滑剂用软管接头(标称尺寸 1/4英寸至 4英寸)规范 Specification for hose couplings for petrol, oil and lubricants (3/4 in. to 4 in. nominal sizes)
    BS 2464-2-1969 石油、汽油和润滑油用软管接头规范.第2部分:高压接头 Specification for hose couplings for petrol, oil and lubricants - High pressure couplings
    BS 2464-3-1968 汽油、石油和润滑剂用软管接头规范.第3部分:快速接头 Specification for hose couplings for petrol, oil and lubricants - Quick-acting couplings
    BS 2464-4-1980 汽油、石油和润滑剂用软管接头规范.第4部分:欧洲型 100mm快速接头规范 Hose couplings for petrol, oil and lubricants - Specification for 100 mm quick-acting couplings: European type
    BS 2761-1983 球面接头规范 Specification for spherical ground joints
    BS 2782-11 Method 1108A-1989 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1108A:管界面限定碰撞率 Methods of testing plastics - Thermoplastics pipes, fittings and valves - True impact rate (TIR) boundaries of pipes
    BS 2782-11 Method 1109A-1989 塑料试验方法.第11部分:热塑性塑料、接头和阀门.试验方法1109A:非承压聚乙烯管和接头耐坏境应力开裂性 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
    BS 2782-11 Method 1121B-1997 塑料的试验方法.第11部分:热塑管、接头和阀门.流体输送用热塑管.试验方法1121B:额定外部直径和额定压力.米 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Metric series
    BS 2782-11 Method 1121C-1997 塑料试验方法.第11部分:热塑管、接头和阀门.流体输送用热塑管.试验方法1121C:额定外部直径和额定压力.英尺 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Inch-based series
    BS 2782-11 Method 1121H-1996 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1121H:非承压液体输送热塑性塑料管.管头损失计算 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses
    BS 2C 4-1973 飞机发动机制冷剂压力灌注接头尺寸规范 Specification for coupling dimensions for aero-engine refrigerant pressure replenishment connections
    BS 2C 5-1976 液氧灌注连接头配合尺寸规范 Specification for mating dimensions for liquid oxygen replenishment couplings
    BS 2M 53-1997 飞机.液压系统.管道和管接头热冲击试验 Aircraft - Fluid systems - Thermal shock testing of piping and fittings
    BS 2SP 101-104-1956 飞行器用旋转套筒、张力传动杆和旋压钢索端部接头(统一螺纹)规范 Specifications for turnbarrels, tension rods and swaged cable-end connections (Unified threads) for aircraft
    BS 2SP 7-1943 飞机材料规范.叉形接头(高强度型)(尺寸号 4B.A.至<1/4>英寸B.S.F Specification for aircraft material - Fork joints (high tensile type) (for sizes No. 4 B.A. to 3/4 inch B.S.F. inclusive)
    BS 31-1940 电气布线用钢导线管和管接头 Specification - Steel conduit and fittings for electrical wiring
    BS 3288-3-1989 架空电力导线绝缘和导线接头.第3部分:绝缘子组件球窝连接接头尺寸 Insulator and conductor fittings for overhead power lines - Dimensions of ball and socket couplings of string insulator units
    BS 336-1989 消防软管接头与辅助设备的规范 Specification for fire hose couplings and ancillary equipment
    BS 341-3-2002 可运输气体容器的阀门.阀门出口接头 Transportable gas container valves - Valve outlet connections
    BS 3799-1974 石油工业用钢管配件、螺旋管接头和套管焊接规范 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry
    BS 3818-1964 柴油机车及有轨内燃机车自动密封加油接头规范 Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars
    BS 3SP 3-1943 飞机材料规范.叉形接头(低强度型)(尺寸自N0.4B.A至<1/2>英寸B.S.F.) Specification for aircraft material - Fork joints (low tensile type) (for sizes No. 4 B.A. to 1/2 inch B.S.F. inclusive)
    BS 4222-1967 牙科手持机的传动联轴器(滑配接头)尺寸规范 Specification for dimensions of the transmission coupling (slip-joint) to dental handpieces
    BS 4368-4-1984 液压和通用压合管接头.第4部分:型号试验要求规范 Metallic tube connectors for fluid power and general use - Specification for type test requirements
    BS 4568-1-1970 电气装置用ISO型米制螺纹钢导管及接头规范.第1部分:钢导管、弯头和接头 Specification for steel conduit and fittings with metric threads of ISO form for electrical installations - Steel conduit, bends and couplers
    BS 4579-2-1973 电缆和电线连接器机械和压合接头性能规范.第2部分:镍、铁及镀铜导线压合接头 Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors
    BS 4607-1-1984 电气装置用非金属导管及接头规范.第1部分:绝缘材料接头和元件规范 Non-metallic conduits and fittings for electrical installations - Specification for fittings and components of insulating material
    BS 4607-5-1982 电气装置用非金属导管及接头规范.第5部分:绝缘材料刚性导管、接头和元件规范 Non-metallic conduits and fittings for electrical installations - Specification for rigid conduits, fittings and components of insulating material
    BS 4622-1970 灰口铁管和管接头规范 Specification for grey iron pipes and fittings
    BS 4742-4-1985 农用机械液压设备.第4部分:挂车和机具用制动系统用液压管接头规范 Hydraulic equipment for agricultural machinery - Specification for hydraulic couplings on braking systems for trailers and trailed equipment
    BS 4742-7-1989 农用机械液压设备.第7部分:农用拖挂车辆液压制动系统管接头用油口连接规范 Hydraulic equipment for agricultural machinery - Specification for port connections for agricultural trailed vehicle hydraulic brake couplings
    BS 4871-3-1985 按认可焊接工艺操作的焊工鉴定考试规范.第3部分:金属管与管板接头间电弧焊 Specification for approval testing of welders working to approved welding procedures - Arc welding of tube to tube-plate joints in metallic materials
    BS 4G 178-2-1986 飞机电缆电线压接头.第2部分:压接检验规范(包括用户检验试验) Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests)
    BS 5200-1997 水管接头和转接器的尺寸规范 Specification for dimensions of hydraulic connectors and adaptors
    BS 534-1990 水和污水用钢管接头和异型管件规范 Specification for steel pipes, joints and specials for water and sewage
    BS 5529-1988 工业用低压开关设备和控制装置规范.A型、直流用、3或4个接头的近距离电感开关 Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form A, for direct current, 3 or 4 terminals
    BS 5611-1978 负载分接头切换开关应用指南 Application guide for on-load tap-changers
    BS 5649-5-1982 路灯杆规范.第5部分:电气接头底座与电线敷设槽规范 Lighting columns - Specification for base compartments and cableways
    BS 572-1985 互换式锥形毛玻璃接头规范 Specification for interchangeable conical ground glass joints
    BS 5911-1-2002 预制混凝土管、管配件和辅助制品.具有软接头的非加筋、加筋混凝土管(包括套管)和管配件规范(对 BS EN 1916: Concrete pipes and ancillary concrete products - Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints(comnplementary to BSEN 1916:2002)
    BS 5911-5-2004 混凝土管和辅助混凝土制品.带软接头的预应力非压力管道和配件的规范 Concrete pipes and ancillary concrete products - Specification for prestressed non-pressure pipes and fittings with flexible joints
    BS 6083-5-1984 助听器.第5部分:内插式耳机短接管接头和封闭装置尺寸规范 Hearing aids - Specification for dimensions of the nipple and sealing device for insert earphones
    BS 6102-15-1991 自行车.第15部分:辐条螺纹接头尺寸规范 Cycles - Specification for dimensions of spoke nipples
    BS 6362-1990 按BS21 "带压密接合螺纹接头的管及配件管螺纹" 攻丝的不锈钢管规范 Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads'
    BS 6464-1984 制炼厂用增强塑料管、配件和接头规范 Specification for reinforced plastics pipes, fittings and joints for process plants
    BS 65-1991 只用于地表水管道和配件的陶管、配件、导管和挠性机械接头规范 Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings
    BS 6537-1984 液压流体设备用U型接头规范 Specification for staple type connectors for hydraulic fluid power applications
    BS 669-1-1989 燃气灶具用软管、管接头和承窩接口.第1部分:采用第1、2类燃气的家用灶具用带绕金属软管、护罩、接头配件和 Flexible hoses, end fittings and sockets for gas burning appliances - Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases
    BS 669-2-1997 燃气灶具用软管、接头和管座.使用第1、2和3类燃气的家用灶具波纹金属软管、封盖、接头和管座规范 Flexible hoses, end fittings and sockets for gas burning appliances - Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st, 2nd and 3rd family gases
    BS 6910-2-1989 电压范围为交流1000V和直流1500Vd.c.的低温浇注树脂复合物和热缩电缆接头.第2部分:现场安装实用规程 Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation
    BS 746-2005+A1-2009 燃气表活接头与转接器用规范 Specification for gas meter unions and adaptors
    BS 7677-1993 管道接头用密封圈缺陷分类推荐标准 Recommendations for classification of imperfections in pipe joint rings
    BS 778-1966 液压用钢管与接头规范 Specification for steel pipes and joints for hydraulic purposes
    BS 8407-2002 地下用输送带机械和叠接接头的规范 Specification for mechanical and spliced joints in conveyor belting for use underground
    BS 864-2-1983 铜和铜合金制毛细管与承压管配件.铜管用毛细管与压合接头规范 Capillary and compression tube fittings of copper and copper alloy. Specification for capillary and compression fittings for copper tubes
    BS 9522 N0001-1982 直流和低频用多触头圆形电气连接件详细规范、带有前面可释放后面可拆卸的压接触点卡口接头.全面评估级 Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling with front release, rear removable crimp contacts - Full assessment level
    BS 9522 N0003-1990 直流和低频用多触点圆形电气连接器详细规范.带后可插入、后释放、后可拆卸压接触点的无档板密封、耐环境影 Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling non-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealed with non-removable solder contact styles - Full plus airframe fit assessment
    BS A 358-3-2000 MJ螺纹.流体系统用的接头的极限尺寸 MJ threads - Limit dimensions for fittings for fluid systems
    BS AU 91-1965 起动蓄电池圆锥形接线端子的电缆接头尺寸(用正极接地部件的汽车和轻便商用汽车)规范 Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system)
    BS DD CEN/TS 1591-3-2007 法兰及其连接件.垫圈的圆形法兰连接件用设计原则.第3部分:金属与金属接点之间的法兰接头的计算方法 Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint
    BS DD CEN/TS 1591-4-2007 法兰及其连接件.垫圈的圆形法兰连接件用设计原则.第4部分:服从压力设备指令、符合设备螺栓接头装配要求的人 Flanges and their joints — Design rules for gasketed circular flange connections — Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
    BS EN 10253-1-1999 对接焊管道接头.通用和无特殊检验要求的锻制碳钢 Butt-welding pipe fittings - Wrought carbon steel for general use and without specific inspection requirements
    BS EN 10253-2-2007 对接焊管道接头.带特殊检验要求的非合金和铁素体合金钢 Butt-welding pipe fittings — Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
    BS EN 10253-3-2008 对焊管接头.无特殊检验要求的锻制奥氏体和奥氏体-铁素体(二相)不锈钢 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
    BS EN 10253-4-2008 对焊管道接头.具有特殊检验要求的锻制奥氏体和铁素体-奥氏体(二相)不锈钢 Butt-welding pipe fittings - Part 4:Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
    BS EN 10311-2005 水和其他含水液体传送用钢管和配件的连接用接头 Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
    BS EN 1075-2000 木结构.试验方法.由冲打孔金属板紧固件构成的接头 Timber structures - Test methods - Joints made with punched metal plate fasteners
    BS EN 1092-2-1997 法兰及其连接.按PN标注的管、阀门、管接头和附件的圆形安装法兰.第2部分:铸铁法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Cast iron flanges
    BS EN 12308-1998 液化天然气设施和设备.用于液化天然气管道的法兰接头垫圈设计适配性试验 Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
    BS EN 12316-1-2000 防水柔性板.接头抗剥离性的测定.屋顶防水沥青板 Flexible sheets for waterproofing - Determination of peel resistance of joints - Bitumen sheets for roof waterproofing
    BS EN 12316-2-2000 防水柔性板.接头抗剥离性的测定.屋顶防水用塑料和橡胶薄板 Flexible sheets for waterproofing - Determination of peel resistance of joints - Plastic and rubber sheets for roof waterproofing
    BS EN 12317-1-2000 防水柔性板.屋顶防水沥青板.接头抗剪切性的测定 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of shear resistance of joints
    BS EN 12512-2001 木结构.试验方法.机械紧固件接头的周期测试 Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners
    BS EN 12517-2-2008 焊缝的无损检验.通过射线照相术评估铝及铝合金的焊接接头.验收等级 Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels
    BS EN 1254-1-1998 铜和铜合金.管路接头.铜管毛细管钎焊法或铜焊法用端头接头 Copper and copper alloys - Plumbing fittings - Fittings with ends for capillary soldering or capillary brazing to copper tubes
    BS EN 1254-2-1998 铜和铜合金.管路接头.与铜管一起使用的压合接头 Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with copper tubes
    BS EN 1254-3-1998 铜和铜合金.管路接头.与塑料管一起使用的压合接头 Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with plastics pipes
    BS EN 1254-4-1998 铜和铜合金.管路接头.与带有毛细管或压力端头的其它端头连接的管接头 Copper and copper alloys - Plumbing fittings - Fittings combining other end connections with capillary or compression ends
    BS EN 1254-5-1998 铜和铜合金.管路接头.铜管毛细管铜焊法用短端头接头 Copper and copper alloys - Plumbing fittings - Fittings with short ends for capillary brazing to copper tubes
    BS EN 12560-1-2001 法兰及其接头.标示等级的法兰衬垫.有或无插孔的非金属水平衬垫 Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic flat gaskets with or without inserts
    BS EN 12560-2-2001 法兰及其接头.标示等级的法兰衬垫.钢法兰用螺旋缠绕衬垫 Flanges and their joints - Gaskets for Class-designated flanges - Spiral wound gaskets for use with steel flanges
    BS EN 12560-3-2001 法兰及其接头.标示等级的法兰衬垫.非金属PTFE外壳衬垫 Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic PTFE envelope gaskets
    BS EN 12560-4-2001 法兰及其接头.标示等级的法兰的衬垫.钢法兰用波纹状、水平或皱缩金属和填充金属衬垫 Flanges and their joints - Gaskets for Class-designated flanges - Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
    BS EN 12560-5-2001 法兰及其接头.标示等级的法兰的衬垫.钢法兰用金属环接头衬垫 Flanges and their joints - Gaskets for Class-designated flanges - Metallic ring joint gaskets for use with steel flanges
    BS EN 12560-7-2004 法兰及其接头.分级标示法兰用垫圈.钢法兰用涂覆金属的套层垫圈 Flanges and their joints - Gaskets for class-designated flanges - Covered metal jacketed gaskets for use with steel flanges
    BS EN 12573-4-2000 焊接非静压热塑罐.法兰接头的设计和计算 Welded static non-pressurized thermoplastic tanks - Design and calculation of flanged joints
    BS EN 1277-2004 塑料管道系统.地下无压用热塑性管道系统.弹性密封环型接头密封性的试验方法 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
    BS EN 12797-2000 铜焊.铜焊接头破坏试验 Brazing - Destructive tests of brazed joints
    BS EN 12799-2000 铜焊.铜焊接头无损检验 Brazing - Non-destructive examination of brazed joints
    BS EN 12814-1-2000 热塑性半成品焊接接头试验.弯曲试验 Testing of welded joints of thermoplastics semi-finished products - Bend test
    BS EN 12814-2-2000 热塑半成品焊接接头试验.拉伸试验 Testing of welded joints of thermoplastics semi-finished products - Tensile test
    BS EN 12814-3-2000 热塑半成品焊接接头试验.拉伸蠕变试验 Testing of welded joints of thermoplastics semi-finished products - Tensile creep test
    BS EN 12814-4-2001 热塑半成品焊接接头试验.剥离试验 Testing of welded joints of thermoplastics semi-finished products - Peel test
    BS EN 12814-5-2000 热塑半成品焊接接头试验.宏观检查 Testing of welded joints of thermoplastics semi-finished products - Macroscopic examination
    BS EN 12814-6-2000 热塑半成品焊接接头试验.低温拉伸试验 Testing of welded joints of thermoplastics semi-finished products - Low temperature tensile test
    BS EN 12814-7-2002 热塑性半成品的焊接接头的试验.腰形试验样品的拉伸试验 Testing of welded joints of thermoplastics semi-finished products - Tensile test with waisted test specimens
    BS EN 12814-8-2001 热塑半成品焊接接头试验.要求 Testing of welded joints of thermoplastic semi-finished products -. Requirements
    BS EN 13090-2000 建筑物内气体管道的螺纹接头重新密封方法 Means for resealing threaded joints of gas pipework in buildings
    BS EN 13100-1-2000 热塑性半成品焊接接头无损检验.目视检查 Non destructive testing of welded joints of thermoplastics semi-finished products - Visual examination
    BS EN 13100-2-2004 热塑性半成品焊接接头的无损检验.X射线照相检验 Non destrictive testing of welded joints of thermoplastics semi-finished products - X-ray radiographic testing
    BS EN 13100-3-2004 热塑性半成品焊接接头的无损检验.超声检验 Non-destructive testing of welded joints in thermoplastics semi-finished products - Ultrasonic testing
    BS EN 13271-2002 木材紧固件.连接器接头的特征载荷能力和滑脱系数 Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints
    BS EN 14257-2006 粘合剂.木材粘合剂.温度升高时搭接接头拉伸强度的测定(WATT '91) Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
    BS EN 14258-2004 结构粘合剂.短期或长期暴露于特定温度条件下的粘合接头的机械性能 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
    BS EN 1435-1997 焊缝的无损检验.焊接接头的放射性检验 Non-destructive examination of welds - Radiographic examination of welded joints
    BS EN 144-3-2003 呼吸保护装置.气瓶阀.潜水用Nitrox和氧气气瓶的出口接头 Respiratory protective devices - Gas cylinder valves - Outlet connections for diving gases Nitrox and oxygen
    BS EN 14454-2005 防饮用水回流污染的装置.软管接头防回流装置DN 15~DN 32.A型H系列 Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 inclusive - Family H, type A
    BS EN 14525-2005 不同材料管道用球墨铸铁大公差联接器和法兰接头:球墨铸铁、灰铸铁、钢、PVC-U、PE和纤维水泥 Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
    BS EN 14741-2006 热塑管和管道系统.非压力掩埋用接头.通过评估密封压力测定弹性密封件接合处的长期密封性能的试验方法 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
    BS EN 15096-2008 防饮用水回流污染用装置.软管接头防真空阀.包括B型和D型H系列的DN 15~DN 25.通用技术规范 Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification
    BS EN 1515-1-2000 法兰及其接头.螺栓连接.螺栓连接的选择 Flanges and their joints - Bolting - Selection of bolting
    BS EN 15617-2009 焊接接头的无损检验.飞行时间衍射技术(TOFD).接受等级 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
    BS EN 1591-2-2008 法兰及其接头.带衬垫的环形法兰连接件的设计规则.垫圈参数 Flanges and their joints - Design rules for gasketed circular flange connections - Part 2:Gasket parameters
    BS EN 1741-1998 带有开放结构的蒸气加气混凝土或轻集料混凝土预制构件之间接头处非平面方向抗剪切强度的测定 Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
    BS EN 175201-804-2000 电子元器件质量评定协调系统.详细规范.环形连接器.螺纹接头直径1.6mm圆触点 Harmonized system of quality assessment for electronic components - Detail specification - Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling
    BS EN 1829-2-2008 高压喷水机器.安全要求.软管、软管管路和接头 High-pressure water jet machines — Safety requirements — Part 2: Hoses, hose lines and connectors
    BS EN 1993-1-8-2005 欧洲法规3.钢结构的设计.接头设计 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
    BS EN 205-2003 胶粘剂.非结构用木材粘结剂.搭接接头拉力剪切强度的测量 Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints
    BS EN 21089-1992 点焊设备用电极锥度接头.尺寸 Electrode taper fits for spot welding equipment - Dimensions
    BS EN 2591-217-2002 电气和光学连接元件.试验方法.终端接线片和连机拼合接头在规定电流下的电压降 Elements of electrical and optical connection - Test methods - Voltage drop under specified current for terminal lugs and in-line splices
    BS EN 2591-218-2002 电气和光学连接元件.试验方法.用温度和电流循环法试验终端接线片和连机拼合接头的衰老程度 Elements of electrical and optical connection - Test methods - Ageing of terminal lugs and in-line splices by temperature and current cycling
    BS EN 2591-219-2002 电器和光学连接元件.试验方法.绝缘终端接线片和连机拼合接头的电压强度 Elements of electrical and optical connection - Test methods - Voltage strength for insulated terminal lugs and in-line splices
    BS EN 2591-220-2005 航空航天系列.电和光学连接元件.试验方法.电流和温度周期性变化引起的触点/导体接头老化 Elements of electrical and optical connection — Test methods — Part 220: Contact/conductor joint ageing by current and temperature cycling
    BS EN 2665-003-1999 额定电流为20A至50A的温度补偿的三极电路断路器.米制螺纹接头.产品标准 Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals - Product standard
    BS EN 2665-004-1999 额定电流为20A至50A的温度补偿的三极电路断路器.UNC螺纹接头.产品标准 Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals - Product standard
    BS EN 26891-1991 木结构.机械紧固件接头.强度和变形特性测定一般原则 Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics
    BS EN 2794-003-1999 额定电流为20A至50A的温度补偿的单极电路断路器.米制螺纹接头.产品标准 Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals - Product standard
    BS EN 2794-004-1999 额定电流为20A至50A的温度补偿的单极电路断路器.UNC螺纹接头.产品标准 Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals - Product standard
    BS EN 28430-1-1992 点焊设备规程.电极夹具.第1部分:锥形接头锥度1:10 Specification for resistance spot welding - Electrode holders - Taper fixing 1:10
    BS EN 28430-2-1992 点焊设备规程.电极夹具.第2部分:莫氏锥形接头 Specification for resistance spot welding - Electrode holders - Morse taper fixing
    BS EN 28970-1991 木结构.用机械紧固件连接的接头试验.木材致密度要求 Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density
    BS EN 295-1-1991 排水管和下水道用陶管和管配件及管接头.要求 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements
    BS EN 295-2-1991 排水管和下水道用陶管和管配件及管接头.质量控制和抽样 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Quality control and sampling
    BS EN 295-3-1991 排水管和下水道用陶管和管配件及管接头.试验方法 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Test methods
    BS EN 295-4-1995 排水管和下水道用陶制管和管配件及管接头.专用配件、管接头和配套附件的要求 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for special fittings, adaptors and compatible accessories
    BS EN 295-5-1994 排水管和下水道用陶管和管配件及管接头.带孔的陶管及配件的要求 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for perforated vitrified clay pipes and fittings
    BS EN 295-6-1996 排水管和污水管用陶制管、管件及管接头.陶制管人孔的要求 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes
    BS EN 295-7-1996 排水管和污水管用陶制管、管件及管接头.陶制管和管插接接头的要求 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking
    BS EN 3079-2006 8°30'压力<28000kPa的导管接头.适配器.米制系列.技术规范 Pipe coupling 8 °30' up to 28000 kPa - Adaptors - Metric series - Technical specification
    BS EN 3082-2001 航空航天系列.钛合金管连接件8°30'.修理用闷头焊接活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded, for repair
    BS EN 3083-2001 航空航天系列.钛合金管连接件8°30'.修理用闷头长焊接端头活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded end, for repair
    BS EN 3084-2001 航空航天系列.钛合金管连接件8°30'.修理用焊接端头螺纹活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded end threaded for repair
    BS EN 3244-2001 航空航天系列.钛合金8°30’管连接件.双端头的活接头 Aerospace Series - Pipe coupling 8 °30' in titanium alloy - Unions, double ended
    BS EN 3245-2001 航空航天系列.钛合金8°30'管连接件.变径活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, reducer
    BS EN 3246-2001 航空航天系列.钛合金8°30' 管连接件.、闷头活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead
    BS EN 3247-2001 航空航天系列.钛合金8°30'管连接件.闷头焊接端活接头、 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded end
    BS EN 3248-2001 航空航天系列.钛合金管连接件8°30’.带锁紧装置的缩径管端的转接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Adaptors, reduced pipe end, with lockring
    BS EN 3373-001-2007 航空航天系列.电导体压接用终端盒和内嵌式接头.第001部分:技术规范 Aerospace series — Terminal lugs and in-line splices for crimping on electric conductors — Part 001: Technical specification
    BS EN 3373-010-2009 航空航天系列.电导体压接用终端盒和内嵌式接头.米制和英制螺栓系列用温度低于150℃铜导体压接用镀锡环型终 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series - Product standard
    BS EN 3373-011-2009 航空航天系列.电导体压接用终端盒和内嵌式接头.米制和英制螺柱系列用温度小于260℃、铜导体压接用镀镍环形 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard
    BS EN 3373-012-2005 电导体压接用终端盒和内嵌式接头.第012部分:温度小于150℃铜导体压接用绝缘和密封的内嵌式接头.产品标准 Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 ℃ - Product standard
    BS EN 3373-013-2005 电导体压接用终端盒和内嵌式接头.第013部分:温度小于260℃铜导体压接用绝缘和防潮的内嵌式接头.产品标准 Terminal lugs and in-line splices for crimping on electric conductors - Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260 ℃ - Product standard
    BS EN 3566-2001 航空航天系列.钛合金8°30'管连接件.带锁紧装置的转接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Adaptor with lockring
    BS EN 3690-2001 航空航天系列.钛合金8°30'管联接件.长闷头活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long
    BS EN 3691-2001 航空航天系列.钛合金8°30'管连接件.长焊接的闷头活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded
    BS EN 3773-003-1999 最大转换容量为65 In/1000 A,额定电流为1A至25A的温度补偿的单极电路断路器.米制螺纹接头.产品标准 Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1000 A max - Metric thread terminals - Product standard
    BS EN 3773-004-1999 最大转换容量为65 In/1000 A,额定电流为1A至25A的温度补偿的单极电路断路器.UNC螺纹接头.产品标准 Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1000 A max - UNC thread terminals - Product standard
    BS EN 3774-003-1999 转换容量为65 In,额定电流为2A至25A的温度补偿的三级电路断路器.米制螺纹接头.产品标准 Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In - Metric thread terminals - Product standard
    BS EN 3774-004-1999 转换容量为65 In,额定电流为2A至25A的温度补偿的三级电路断路器.UNC螺纹接头.产品标准 Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In - UNC thread terminals - Product standard
    BS EN 3852-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.直螺纹式焊接接头 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded
    BS EN 3853-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.直活螺纹接头 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, threaded
    BS EN 387-2002 胶合层压板.大指形接头.性能要求和最低生产要求 Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements
    BS EN 4031-2001 航空航天系列.钛合金管连接件8°30'.焊接活接头用螺母 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Nut for welded union
    BS EN 4051-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.油口接头 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy - Port connection
    BS EN 4186-2001 航空航天系列.钛合金管连接件8°30'.十字形活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, cross
    BS EN 4233-2001 航空航天系列.钛合金管连接件8°30'.带螺纹的焊接活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded, threaded
    BS EN 4552-2003 航空航天系列.耐热钢制球面37 管联接器.端部焊接的直管接头.英制 Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Straight nipples, welded end - Inch series
    BS EN 4553-2003 航空航天系列.耐热钢制球面37 管联接器.端部焊接的90 弯头管接头.英制 Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Elbow 90 ° nipples, welded end - Inch series
    BS EN 4557-2003 航空航天系列.耐热钢制球面37 管联接器.端部焊接的T形管接头.英制 Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Tees nipples, welded end - Inch series
    BS EN 4610-2005 航空航天系列.8°30'钛合金管接头.带推进线螺母的45°弯头 Pipe coupling 8°30' in titanium alloy — Elbows 45°, with thrust wire nut
    BS EN 50377-2-1-2001 光纤通信系统使用的接头组件和互连元件.产品规范.接线端设在IEC 60793-2类B1单模纤维上的FC-PC型 Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre
    BS EN 512-1995 纤维水泥制品.压力管道和接头 Fibre-cement products - Pressure pipes and joints
    BS EN 514-2000 制作门窗用未增塑聚氯乙烯(PVC-U)型材.胶结角和T接头的强度测定 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints
    BS EN 61284-1998 架空线.接头要求和试验 Overhead lines - Requirements and tests for fittings
    BS EN 61300-2-33-2007 纤维光学互联装置和无源部件.基本试验和测量程序.试验.光缆接头盒组装和拆卸 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Assembly and disassembly of fibre optic closures
    BS EN 61466-1-1997 标称电压超过1000V的架空线用复合绝缘子串组合件.标准强度等级和接头配件 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V. Standard strength classes and end fittings
    BS EN 639-1995 包括接头和配件的混凝土压力管的共同要求 Common requirements for concrete pressure pipes including joints and fittings
    BS EN 640-1995 钢筋混凝土压力管和分布钢筋混凝土压力管(非圆柱型),包括接头和配件 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
    BS EN 641-1995 包括接头和配件的圆柱型加筋混凝土压力管 Reinforced concrete pressure pipes, cylinder type, including joints and fittings
    BS EN 642-1995 包括接头、配件和管道预应力钢特殊要求的圆柱型和非圆柱型预应力混凝土压力管 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
    BS EN 715-1995 热塑管道系统.小直径压力管和配件间端部负荷轴承接头.在包含端推力的内部水压下密封性的试验方法 Thermoplastics piping systems - End-load-bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust
    BS EN 751-1-1997 与第1,2,3类家庭用燃气和热水装置连接的金属螺纹接头的密封材料.厌氧密封剂 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Anaerobic jointing compounds
    BS EN 751-2-1997 与第1,2,3类家庭用燃气和热水装置连接的金属螺纹接头的密封材料.非硬化密封剂 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Non-hardening jointing compounds
    BS EN 751-3-1997 第1,2,3类家庭用燃气和热水装置连接的金属螺纹接头的密封材料.非烧结PTFE密封带. Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Unsintered PTFE tapes
    BS EN 804-1995 塑料管道系统.压力管道溶剂胶粘接头的注射模塑承口连接管件.短期内部液压压力的试验方法 Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
    BS EN 846-3-2000 圬工辅助砌块的试验方法.预制基地加固处接头的剪切负载容量的测定 Methods of test for ancillary components for masonry - Determination of shear load capacity of welds in prefabricated bed joint reinforcement
    BS EN 877-1999+A1-2006 建筑物中水排放用生铁管和配件及其接头和配件.要求、试验方法和质量保证 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings — Requirements, test methods and quality assurance
    BS EN 911-1996 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头.外部流体静压条件下防漏密封试验方法 Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
    BS EN ISO 10042-2006 焊接.铝和铝合金弧焊接头.缺陷质量分级 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
    BS EN ISO 10692-2-2001 气瓶.用于微电子工业的储气瓶阀的连接接头.接到钢瓶连接接头上的阀门的定型试验和规范 Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Specification and type testing for valve to cylinder connections
    BS EN ISO 11144-1997 牙科设备.漱口冲洗牙用给排水管接头 Dental equipment - Connections for supply and waste lines
    BS EN ISO 13844-2000 塑料管道系统.与未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯弹性密封环式套筒接头.负压下的密封性试验方法 Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure
    BS EN ISO 13845-2000 塑料管道系统.与未增塑聚氯乙烯管一起使用的弹性密封环式套筒接头.内压下角度偏转密封试验 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection
    BS EN ISO 13846-2001 塑料管道系统.热塑性压力管用端负载和无端负载支承组件和接头.内部水压下长期密封性的试验方法 Plastics piping systems - End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure
    BS EN ISO 13919-1-1997 焊接.电子和激光束焊接接头.缺陷的质量级别导则.钢 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel
    BS EN ISO 13919-2-2001 焊接.电子和激光束焊接接头.缺陷的质量分级指南.铝及其可焊合金 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys
    BS EN ISO 14324-2003 电阻点焊.焊接有损试验.点焊接头的疲劳试验方法 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints
    BS EN ISO 15236-4-2004 钢丝绳运输带.硫化的带接头 Steel cord conveyor belts - Vulcanized belt joints
    BS EN ISO 15245-1-2001 气瓶.连接储气瓶阀门接头用平行螺纹.规范 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Specification
    BS EN ISO 16070-2006 石油和天然气工业.下降孔设备.锁紧芯轴和落地螺纹接头 Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples
    BS EN ISO 17659-2004 焊接.带图解的焊接接头的多语种术语 Welding - Multilingual terms for welded joints with illustrations
    BS EN ISO 22825-2006 接头的无损检验.超声波试验.奥氏体钢和镍基合金接头的试验 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
    BS EN ISO 4797-2005 实验室玻璃器皿.锥形磨口接头烧瓶 Laboratory glassware - Boiling flasks with conical ground joints
    BS EN ISO 5356-1-2004 麻醉和呼吸设备.圆锥形接头.锥体和锥套 Anaesthetic and respiratory equipment - Conical connectors - Cones and sockets
    BS EN ISO 5620-1-1997 造船和海上建筑物.饮用水箱注水接头.总要求 Shipbuilding and marine structures - Filling connection for drinking water tanks - General requirements
    BS EN ISO 5620-2-1997 造船和海上建筑物.饮用水箱注水接头.部件 Shipbuilding and marine structures - Filling connection for drinking water tanks - Components
    BS EN ISO 5817-2007 焊接.钢、镍、钛和其合金的熔焊接头(束焊除外).缺陷的质量等级 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections
    BS EN ISO 5828-2001 电阻焊设备.连接水冷接头的二次接线电缆.尺寸和特性 Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics
    BS EN ISO 6149-1-2007 用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形密封圈的端口和螺纹端头.O形密封用平切壳体端口 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Ports with truncated housing for O-ring seal
    BS EN ISO 6149-2-2007 液压流体传动和一般用途的管接头.带ISO 261米制螺纹和O形密封圈的油口和螺纹端头.重型(S系列)螺柱端头的尺 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions , design, test methods and requirements for heavy-duty (S series) stud ends
    BS EN ISO 6149-3-2007 液压流体传动和一般用途的管接头.带ISO 261米制螺纹和O形密封圈的油口和螺纹端头.轻型(L系列)螺柱端头的尺 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions , design, test methods and requirements for light-duty (L series) stud ends
    BS EN ISO 8092-1-1998 道路车辆.车上电气布线线束的连接.单极连接接头用接线片.尺寸和特殊要求 Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for single-pole connections - Dimensions and specific requirements
    BS EN ISO 8434-4-2000 液压及通用金属管连接件.有O形面焊接管接头的24度锥形连接件 Metallic tube connections for fluid power and general use - 24 ° cone connectors with O-ring weld-on nipples
    BS EN ISO 9692-2-1998 焊接和相关工艺.接头的预处理.钢的埋弧焊 Welding and allied processes - Joint preparation - Submerged arc welding of steels
    BS EN ISO 9692-3-2001 焊接和相关工艺.接头的准备.铝及其合金的金属极惰性气体保护焊和钨极惰性气体保护焊 Welding and allied processes - Joint preparation - Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
    BS EN ISO 9692-4-2003 焊接和相关工艺.接头制备.包钢 Welding and allied processes - Joint preparation - Clad steels
    BS ISO 10955-1999 飞行器操纵钢丝绳用末端接头和松紧套筒.技术规范 End-fittings and turnbarrels for aircraft control wire rope - Technical specification
    BS ISO 12151-2-2003 液压传动和通用联接件.软管接头.带ISO 8434-1和ISO 8434-4 O形圈24锥形末端的软管接头 Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings
    BS ISO 12151-4-2007 用于液压流体传动和一般用途的接头.软管配件.带ISO 6149米制螺柱端头的软管配件 Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6149 metric stud ends
    BS ISO 12151-5-2007 用于液压流体传动和一般用途的接头.软管组件.带ISO 8434-2 37°扩口端的软管配件 Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-2 37 ° flared ends
    BS ISO 13486-1-1999 道路车辆.液压制动系统.双扩口管,螺纹孔,外螺纹接头和管座 Road vehicles - Hydraulic braking systems - Double-flare pipes, tapped holes, male fittings and tube seats
    BS ISO 13950-2007 塑料管和管件.电熔合接头用自动识别系统 Plastics pipes and fittings - Automatic recognition systems for electrofusion joints
    BS ISO 13953-2001 聚乙烯管道和配件.根据对焊接头对试样的抗拉强度和断裂模式的测定 Polyethelene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
    BS ISO 15509-2001 粘合剂.工程塑料接头粘合强度测定 Adhesives - Determination of the bond strength of engineering-plastic joints
    BS ISO 16422-2006 压力送水用定向未增塑聚(氯)乙烯(PVC-O)制作的管道和接头.规范 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications
    BS ISO 22826-2006 金属材料焊缝的破坏性试验.激光和电子束焊测定窄接头硬度的试验(维氏和努氏硬度试验) Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
    BS ISO 24497-3-2007 无损检验.金属磁存储器.焊接接头的检验 Non-destructive testing - Metal magnetic memory - Inspection of welded joints
    BS ISO 2974-2005 柴油机.60°锥孔的高压油管接头管端部连接 Diesel engines - High-pressure fuel injection pipe end-connections with 60 ° female cone
    BS ISO 5675-2008 农业拖拉机和机械.通用快动液压接头 Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
    BS ISO 6149-4-2006 用于流体传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的油口和螺纹端头.内外六角端口栓塞的尺寸、 Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions, design, test methods and requirements for external and internal hex port plugs
    BS ISO 6162-1-2002 液压传动.带对开夹或整体式法兰夹的法兰接头以及公制或英制螺钉.在压力为3,5MPa(35bar)至35MPa(350bar),DN1 Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
    BS ISO 6162-2-2002 液压传动.带对开夹或整体式法兰夹的法兰接头以及公制或英制螺钉.在压力为35MPa(350bar)至40MPa(400bar),DN1 Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
    BS ISO 6489-2-2002 农用车辆.被牵引和牵引车辆间的机械连接装置.第2部分:40号 U型钩接头的规范 Agricultural vehicles - Mechanical connections between towed and towing vehicles - Specifications for clevis coupling 40
    BS ISO 7169-2007 航空航天.液压系统用24°锥形的、压力范围截至3000psi或21000kPa的可拆卸管接头.采购规范(英制/米制) Aerospace - Separable tube fittings for fluid systems, for 24 ° cones, for pressures up to 3000 psi or 21000 kPa - Procurement specification, inch/metric
    BS ISO 7241-2-2000 液压传动.快换接头.试验方法 Hydraulic fluid power - Quick-action couplings - Test methods
    BS ISO 7876-4-2005 燃油喷射装置.词汇.高压管和末端接头 Fuel injection equipment - Vocabulary - High-pressure pipes and end-connections
    BS ISO 8267-1-2006 飞行器.牵引杆附属接头的接口要求.干线飞行器 Aircraft - Tow bar attachment fittings interface requirements - Main line aircraft
    BS ISO 8267-2-2006 飞行器.牵引杆附属接头的接口要求.区域性飞行器 Aircraft - Tow bar attachment fittings interface requirements - Regional aircraft
    BS ISO 8434-2-2007 液压传动和通用金属管连接件.37°扩口管接头 Metallic tube connections for fluid power and general use - 37 ° flared connectors
    BS ISO 8434-3-2005 用于液压传动和一般用途的金属管接头.O形圈端面密封管接头 Metallic tube connections for fluid power and general use - O-ring face seal connectors
    BS SP 119 and SP 120-1957 航空用高强度钢叉形接头(统一螺纹) High tensile steel fork joints (Unified threads) for aircraft
    BS SP 33-39-1951 航空用旋转套筒、张力杆和型锻钢丝绳端面接头规范 Specifications for turnbarrels, tension rods and swaged cable-end connections for aircraft
    编号 中文名称 英文名称
    顶一下
    (0)
    0%
    踩一下
    (0)
    0%
    发表评论
    请自觉遵守互联网相关的政策法规,严禁发布色情、暴力、反动的言论。
    评价:
    表情:
    用户名: 验证码:点击我更换图片
    别揉我奶头~嗯~啊~的叫视频,渣男壁纸,免费男人狂躁女人视频免费看,无码白浆丝袜在线播放,脚麻是什么原因,246+天天好彩免费资料大全今期开,18禁成年免费无码国产,中国女人69XXXXX免费,一本大道一卡二卡三卡四卡,美女翘臀强进入系列在线观看 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>